Jump to main content Jump to main navigation

 Free standard shipping to U.S. addresses on orders $39+, after discounts are applied.    

Keurig® K-Classic™ Coffee Maker

Keurig® K-Classic™ Coffee Maker

Keurig® Hot Brewer
  • Free standard shipping
  • Brews in under a minute
  • Brews 6 oz., 8 oz., and 10 oz. sizes
  • 13.0"H x 9.8"W x 13.3"D

    First cup. Fourth cup - with Keurig®, it's always a fresh cup. The K-Classic™ Coffee Maker brews a perfect cup of coffee, tea, hot cocoa or iced beverage in under one minute at the touch of a button. With the choice of three cup sizes, the K50 offers a removable drip tray to accommodate travel mugs.

    Choose from hundreds of varieties from the brands you love, including America's leading coffee brands.

    Key Features:

    • • Brews coffee, tea, hot cocoa, specialty, and iced beverages
    • • Brews 6 oz., 8 oz., and 10 oz. sizes
    • • Always ready and brews in under a minute
    • • Removable 48 oz. Water Reservoir
    • • Programmable Auto Off feature
    • • Indicator lights
    • • Removable Drip Tray
    • • Compatible with My K-Cup® Universal Reusable Coffee Filter
    How do I descale my brewer?
    Before you begin, you will need a large ceramic mug, fresh water, descale solution and access to a sink. Do not use a paper cup. STEP 1: FIRST DESCALING SOLUTION RINSE
    • Turn on your brewer.
    • Pour one third (4.6 oz.) of the Keurig™ Descaling Solution into the cold Water Reservoir then add fresh water to the 10 oz. fill level.
    • Place a large ceramic mug on the Drip Tray Plate. Do not use a paper cup.
    • Lift the Handle but do not add a K-Cup® pod. After 5 seconds, lower Handle and press the BREW button.
    • Once solution is dispensed, discard hot contents into sink. STEP 2: SECOND DESCALING SOLUTION RINSE
    • Repeat above process up until you press the BREW button.
    • When BREW button turns solid red, power off as it starts to dispense.
    • Let brewer stand for at least 30 minutes.
    • Power on the brewer, lift and lower Handle, then press BREW button.
    • Discard the hot contents into sink. STEP 3: FRESH WATER RINSE
    • Repeat Step 1 (3 times) – using 10 oz. of fresh water each time.
    • You may need to perform additional Fresh Water Rinse cycles if you notice any residual taste.
    How do I fix a short cup?
    If your brewer is not brewing the full amount selected, it may be caused by the following:
    • The exit needle is clogged by coffee grounds or cocoa mix. Please refer to pages 12-13 of your user guide for cleaning instructions. (Download user guide below)
    • The brewer may need to be descaled. Please refer to the descaling instructions.
    • The removable water reservoir was removed during brewing. Place the water reservoir back onto the brewer and perform a cleansing brew without a portion pod.


    Recently viewed